LOW SPEED GEARLESS PERMANENT MAGNET GENERATOR AC ALTERNATORS
1. The excitation winding, brush and collector ring structure is omitted, so the whole structure is simple, avoiding the faults of excitation winding of excitation generator which is easy to burn and break, and the brush and collector ring are easy to wear, etc. The performance is reliable.
2. Simplified rotor structure, there are two kinds of parallel magnetic field structure and series magnetic field structure: the rotor of parallel magnetic field structure is made by casting and pressing, and the permanent magnet is embedded inside, with high speed.
3. The rotor of series magnetic field structure is made of steel with permanent magnets embedded in the surface, which has strong magnetic induction strength on the rotor surface and a strong and reliable overall structure.
4. Good low-speed power generation performance and high output power. In idle operation, the output power is twice as high as that of the excitation type generator.
5. Adopting switching rectifier and voltage regulator and low-current pulse charging, avoiding the possibility of over-current charging and causing damage to the battery, which can extend the service life of the battery.
Model | FY-20KW | FY-25KW | FY-25KW | FY-30KW | FY-30KW |
Rated power | 20KW | 25kw | 25kw | 30kw | 30kw |
Max power | 22kw | 30kw | 30kw | 38kw | 38kw |
Rated speed | 220rmp | 220rmp | 170rmp | 100rmp | 70rmp |
Rated voltage | 220v/380V | 220v/380V/430V | 220v/380V/430V | 220v/380V/430V | 220v/380V/430V |
Start Torque | 67.8 Nm | 73.6 Nm | 79 Nm | 102.3 Nm | 115 Nm |
Rate Torque | 868Nm | 996Nm | 986Nm | 1259Nm | 1297Nm |
Output Current | AC | ||||
Efficiency | >75% | ||||
Service Life | More than 20 years | ||||
Insulation Class | F | ||||
Bearing | HRB or for you order | ||||
Generator | 3 phase Permenent Magnet Synchronous Generator | ||||
Shaft Material | Stainless Steel | ||||
Shell Material | Aluminium Alloy | ||||
Permanent Magnet Material | Rare Earth NdFeB |
1) 1 PC Generator
2) 1 Set Installation screws
Other styles available:
A: Direct Shaft/Taper Shaft
B: 220V/380v/430V
C: Without Base/With Base
1.Competitive Price
--We are the factory/manufacturer so we can control production costs and then sell at the lowest price.
2.Controllable quality
--All products will be produced in our factory so we can show you every detail of the production and let you check the quality of the order.
3. Multiple payment methods
-- We accept online Alipay, bank transfer,Paypal ,LC, Western union etc.
4.Various forms of cooperation
--We are not only offer you our products, if it is needed, we could be your partner and design product according to your requirement. Our factory is your factory!
5.perfect after-sales service
--As a manufacturer of wind turbine and generator products for over 4 years,we are very experiences to dealing all kinds of problems. So whatever happens,we will solve it at the first time.